PSU: 5V 65A, X2 12V 15A, -12V 10A,-5.2V 15A WP6051

The WP605 11 00 03 was fitted to professional industrial and Broadcast equipment. It is also ideal for multiple disk servers or applications where reliability of service is of the utmost importance.

The supply has over current protection and remote sensing facilities built in. Additionally, the supply is silent in operation. By dint of being designed to be cool running, the unit does not have an internal fan (although it must be ensured that adequate ventilation is provided for the PSU within any installation).

Short Form Data for the PSU is as follows: -

Input

115 - 230 Volts A.C
The unit takes 8 Amps at 115V input and 4 Amps at 230V input.

Outputs

The rating of the supply is 550 Watts (maximum possible capacity).
The capacity of the individual outputs is given in the table below. Total power out cannot exceed 550 Watts.

Output 1 is on the RHS of the unit when viewed from the terminal end

Rails are adjustable to +/- 10% of nominal value.

Physical data

Weight (for shipping purposes) is 4KG
Length 300 mm (Not Including Terminals)
Width 190 mm
Height 50 mm

Accreditation

BSI EN60 950
Certified by BABT
CE Marked

For the full manufacturers data, please take a look here (and click on the data link by the PSU) :-
http://evingar.www.idnet.com//psu_sale.html

Please note the minimum load on the +5V rail required for the PSU to operate correctly. There is a 21 day warranty on this PSU.

Thank you for looking.